Friday, June 6, 2014

RARE Silver Porsche 997.2 GT3RS with GMG Racing LMS Wheels, Roll Bar, Exhaust, and Headers

RARE Silver 997.2 GT3RS with GMG Racing LMS Wheels, Roll Bar, and Exhaust

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.


NEW GMG LMS Centerlock Forged Monoblock Wheel

Click the image to open in full size.

Click the image to open in full size.

Featuring a modern 10 spoke design with scalloping built into the spoke for weight savings, the new GMG LMS Centerlock wheels are made in the USA from the highest quality US made forgings. Each set of wheels will feature a custom finish with a standard color of your choice. Exquisite finishes such as brushed with color tinted clear coats or liquid paints are also available. 

- Suitable for road and track use
- Clear ALL BBK kits on the market 
- Retain factory TPMS sensors
- Retain factory bolts.
- Custom offsets available
- Available in a wide variety of colors and finishes.

Size and Weight Specifications for 997 Turbo GT2 and GT3RS Models

Front 19x9 19.6lb
Rear 19x12 23.0lb

GMG RSR Roll Bar

Click the image to open in full size.

Click the image to open in full size.

The GMG RSR roll bar features a 2 piece design and 1.5” diameter 4130 chrome-moly tubing that has been meticulously TIG welded for superior strength and rigidity. The 2 piece design allows the bar to be mounted to the front seat belt mounts and to the rear strut towers (stronger mounting points) whereas the factory Tequipment bar mounts only to the front and rear seatbelt mounts. Bolt-in installation is accomplished by using Inner Diameter Tube Clamps that are CNC turned and milled for a precise fit. These unique joints allow us to eliminate the more traditional slip fit tubes with an unsightly through-bolt and nut. This design does not only provide superior protection but it also stiffens the chassis, improving the responsiveness and handling of vehicle, and allows for ease of installation.

To accommodate taller drivers, the GMG RSR bolt-in roll bar also allows the seats to slide further back and offer more leg room. A common problem of the factory Tequipment roll bar is that it requires the use of 1-piece fixed back GT3 style seats for improved leg room. For taller drivers, our GMG RSR Roll bar solves this problem. The GMG bolt-in roll bar is a good investment for increased safety for spirited driving and weekend track events without sacrificing versatility. 

Key Features

- Made of 4130 Chrome-Moly & Meticulously TIG welded and normalized at all joints (meets requirements for POC/PCA)

- Mounts to front seatbelt mount and rear strut towers for increased protection and chassis rigidity (factory bar mounts only to front and rear seatbelt mounts)

- Designed to work standard reclining seats, GT3 fixed back seats, or any aftermarket seats, offering drivers the ability to move the seat all the way back (Not possible with the factory Tequipment /Motorsport Roll bar)

- Offers the driver and passenger full movement of the seat for maximum leg room

- Can be used with stock seat belts or 6 point harnesses for track use

- Designed to work with clip-in kit for harnesses (no need to drill holes in your floor to mount the harness anchors)

- Bar comes complete all hardware needed to install

- No drilling of car required (Factory bar requires drilling holes in floor and attaching plates)

- Finished in satin black powder coat - optional colors available

GMG 997 GT3 / GT3RS Center Section with Dual Tip

Click the image to open in full size.

Click the image to open in full size.

Key Features 

- Horsepower and torque increased throughout power band
- Produces deep aggressive, exhaust notes at lowers revs & exotic high pitched exhaust notes at higher revs, similar to the GT3 Cup and RSR
- US Made T304 stainless tubing 
- Meticulously TIG welded throughout to aerospace specifications
- Proprietary megaphone design
- Brushed stainless finish 
- Stainless hardware and clamps
- Sport button remains fully functional for everyday use
- 100% emissions legal - will not void warranty 
- Direct bolt on replacement, no removal of bumper required
- Factory primary mufflers, catalyst, and exhaust flaps are all retained
- Direct bolt on replacement, no removal of bumper required
- Sport button remains fully functional for everyday use
- Hand built to Order with individually serialized laser etched badges

GMG Porsche 997 GT3 Sport Headers with High Flow Catalytic Converters

Click the image to open in full size.

Click the image to open in full size.

Click the image to open in full size.

Key Features:

- Improve the flow of exhaust gases to increase horsepower and torque throughout rev range 
- Equal length runners 
- True 3 into 1 F1 style merge collector 
- German made high-flow 200 cell HJS HD catalytic converters
- US Made T304 stainless tubing throughout 
- Meticulously TIG welded throughout to aerospace specifications
- CNC machined flanges to prevent warping 
- Brushed stainless finish 

International Shipping is Available and Wholesale Inquiries are Welcomed 

Professional installation is available at our facilities in Orange County California or through our worldwide dealer network in Europe, North America, Latin America, Africa and Middle East, Asia and Pacific. 

For all questions and inquiries, please email Jerry@GMGRacing
.com

1 comment:

Natsu Uaganda said...

Get Hourly profit for 200 hours on every hour without any risk and without any work, best business plans ever
AllTimeProfit.com

Newer Post Older Post Home

Blog Archive

About Me

My photo
Orange County, California, United States
I am a freelance automotive photographer / journalist with a deep passion for cars and photography. Blessed with living in Southern California - the mecca and melting pot of different automotive cultures - I get to cover everything from rare European exotics to the Japanese imports to Off-Road trucks. Shooting Motorsports is my niche and I have covered a wide range of series such as: Formula Drift, XDC Drift, D1GP, Redline Time Attack, SCCA World Challenge, American Le mans Series, IZOD Indy, MORE Off-Road. My works have been featured in print publications such as AutoSalon, Rides Magazine, Import Tuner and Heavy Hitters magazines and various online magazines as well such as JTuned.com, Everythingdrift.com Tunerzine.com, Speedlounge.com, and Speedhunters.com. Thanks again for looking at at my page and please check back regularly for updates! For any inquiries, compliments, critiques or criticisms, please contact me via email